286
Step
Command
Remarks
3.
Enable BGP route refresh for
a peer or peer group.
•
Enable BGP route refresh for
the specified peer or peer
group:
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
capability-advertise
route-refresh
•
Enable the BGP route
refresh, multi-protocol
extension, and 4-byte AS
number features for the
specified peer or peer group:
undo peer
{
group-name
|
ipv6-address
[
prefix-length
] }
capability-advertise
conventional
By default, the BGP route refresh,
multi-protocol extension, and
4-byte AS number features are
enabled.
Saving updates
To save all route updates from the specified peer or peer group (IPv4 unicast/multicast address
family):
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
•
Enter BGP IPv4 unicast
address family view:
a. bgp
as-number
[
instance
instance-name
]
b. address-family ipv4
[
unicast
]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp
as-number
[
instance
instance-name
]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[
unicast
]
•
Enter BGP IPv4 multicast
address family view:
f. bgp
as-number
[
instance
instance-name
]
g. address-family ipv4
multicast
N/A
3.
Save all route updates from
the peer or peer group.
peer
{
group-name
|
ipv4-address
[
mask-length
] }
keep-all-routes
By default, the routes are not
saved.
This command takes effect only
for the routes received after this
command is executed.
Summary of Contents for HPE FlexNetwork 7500 series
Page 505: ...493 Connector N A ...
