134
Analysis
The backbone area must maintain connectivity to all other areas. If a router connects to more than
one area, a minimum of one area must be connected to the backbone. The backbone cannot be
configured as a stub area.
In a stub area, all routers cannot receive external routes, and all interfaces connected to the stub
area must belong to the stub area.
Solution
To resolve the problem:
1.
Use the
display ospf peer
command to verify neighbor information.
2.
Use the
display ospf interface
command to verify OSPF interface information.
3.
Use the
display ospf lsdb
command to verify the LSDB.
4.
Use the
display current-configuration configuration ospf
command to verify area
configuration. If more than two areas are configured, a minimum of one area is connected to the
backbone.
5.
In a stub area, all routers attached are configured with the
stub
command. In an NSSA area, all
routers attached are configured with the
nssa
command.
6.
If a virtual link is configured, use the
display ospf vlink
command to verify the state of the
virtual link.
7.
If the problem persists, contact Hewlett Packard Enterprise Support.
Summary of Contents for HPE FlexNetwork 7500 series
Page 505: ...493 Connector N A ...
