4.
Verify that the VLAN with ID 333 is tagged to
Trk3
. Enter:
HP ProCurve Switch 5308xl# show vlan 333
Status and Counters - VLAN Information - Ports - VLAN 333
802.1Q VLAN ID : 333
Name : vlan_333
Status : Port-based
Voice : No
Port Information Mode Unknown VLAN Status
---------------- -------- ------------ ----------
Trk3 Tagged Learn Up
VLAN 333 has been successfully tagged to
Trk3
.
On the server side, complete the following steps:
1.
Create link aggregate
lan900
using ports
lan3
and
lan4
. Enter:
# nwmgr -a -S apa -A links=3,4 -I 900
Addition of links 3 4 to lan900 succeeded.
2.
Create the VLAN with ID 333 over
lan900
. Enter:
# nwmgr -a -S vlan -A vlanid=333, ppa=900
VLAN interface lan5000 successfully configured.
lan5000 current values:
VPPA = 5000
Related PPA = 900
VLAN ID = 333
VLAN Name = UNNAMED
Priority = 0
Priority Override Level = CONF_PRI
ToS = 0
ToS Override Level = IP_HEADER
Configuring VLANs over failover groups
You can improve the availability of VLANs by configuring VLANs over a failover group. To
ensure success, each port (or link aggregate) used in the failover group must be tagged with the
IDs of the VLANs to be created over it. Before creating the failover group, you must decide the
ports to include in the failover group.
Figure D-2 (page 107)
shows the failover group
lan902
consisting of MANUAL link aggregate
lan901
as the active port with ports
lan5
and
lan6
as the standby ports. To protect against
switch failures, link aggregate
lan901
is connected through Switch 1, and ports
lan5
and
lan6
are connected to Switch 2. Switches 1 and 2 are connected to each other as well as the outgoing
network. Two VLANs, with IDs 333 and 334, operate over failover group
lan902
.
106
VLANs over APA using HP Procurve switches
