HP FlexFabric 12900 series Command Reference Manual Download Page 96

Page: 96 / 268

Use

undo ftp client source

to restore the default.

Syntax

ftp

client

source

{

interface

interface-type interface-number

source-ip-address

}

undo

ftp

client

source

Default

No source IPv4 address is configured for outgoing FTP packets. The device uses the primary IPv4 address

of the output interface for the route to the server as the source IP address.

Views

System view

Predefined user roles

network-admin

Parameters

interface

interface-type interface-number

: Specifies the source interface for establishing FTP connections.

The primary IPv4 address of the source interface is used as the source IP address of packets sent to a FTP

server. Make sure the interface is up and has the primary IPv4 address configured. Otherwise, the

transmission fails.

source-ip-address

: Specifies the source IP address for outgoing FTP packets. It must be the IPv4 address

of an interface in up state. Otherwise, the transmission fails.

Usages guidelines

If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the

ftp

command takes precedence over the source address specified

with the

ftp

client

source

command.

The source address specified with the

ftp client source

command applies to all FTP connections. The

source address specified with the

ftp

command applies only to the current FTP connection.

Examples

# Specify the source IPv4 address for outgoing FTP packets as 192.168.20.222.

<Sysname> system-view

[Sysname] ftp client source ip 192.168.20.222

Related commands

ftp

get

Use

get

to download a file from the FTP server and save the file.

Syntax

get

remotefile

[

localfile

]

Views

FTP client view

Predefined user roles

network-admin

Summary of Contents for FlexFabric 12900 series













































































































































































































































































Search results

Summary of Contents for FlexFabric 12900 series

Reviews:

Related manuals for FlexFabric 12900 series

Brands by name

Popular brands

HP FlexFabric 12900 series, Command Reference Manual

Search results

Summary of Contents for FlexFabric 12900 series

Reviews:

Related manuals for FlexFabric 12900 series

Brands by name

Popular brands