HP FlexFabric 12900 series Command Reference Manual Download Page 12

Page: 12 / 268

Usage guidelines

By numbering each output line from a

display

command, you can easily identify the lines of interest.

Each line number is displayed as a 5-character string and might be followed by a colon (:) or hyphen (-).
If you specify the

| by-linenum

option and the

| begin

regular-expression

option for a

display

command,

a hyphen is displayed for all lines that do not match the regular expression.

Examples

# Display VLAN 999 settings, with each output line identified by a number.

<Sysname> display vlan 999 | by-linenum

1: VLAN ID: 999

2: VLAN type: Static

3: Route interface: Configured

4: IP address: 192.168.2.1

5: Subnet mask: 255.255.255.0

6: Description: For LAN Access

7: Name: VLAN 0999

8: Tagged ports: None

9: Untagged ports:

10: FortyGigE1/0/1

# Display the first line that begins with "user-group" in the running configuration and all of the following
lines.

<Sysname> display current-configuration | by-linenum begin user-group

114: user-group system

115- #

116- return

display >

Use

display

to save the output from a

display

command to a separate file.

Syntax

display

command

filename

Views

Any view

Predefined user roles

network-admin
network-operator

Parameters

command

: Specifies the keywords and arguments of a

display

command. To display available keywords

and arguments, enter

display ?

filename

: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.

Usage guidelines

The

display

commands show the configuration, statistics, and states of the device. You can use the

display

command to save the output to a file.

Summary of Contents for FlexFabric 12900 series













































































































































































































































































Search results

Summary of Contents for FlexFabric 12900 series

Reviews:

Related manuals for FlexFabric 12900 series

Brands by name

Popular brands

HP FlexFabric 12900 series, Command Reference Manual

Search results

Summary of Contents for FlexFabric 12900 series

Reviews:

Related manuals for FlexFabric 12900 series

Brands by name

Popular brands