31
Some login management commands are available in both user line view and user line class view:
•
A setting in user line view is applied only to the user line. A setting in user line class view is applied
to all user lines of the class.
•
A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line class
view.
•
A setting in user line view takes effect immediately and affects the online user. A setting in user line
class view does not affect online users and takes effect only for users who log in after the
configuration is completed.
Examples
# Set the user connection timeout to 15 minutes in VTY line class view.
<Sysname> system-view
[Sysname] line class vty
[Sysname-line-class-vty] idle-timeout 15
# In AUX line class view, configure character
s
as the shortcut key for starting a terminal session.
<Sysname> system-view
[Sysname] line class aux
[Sysname-line-class-aux] activation-key s
[Sysname-line-class-aux] quit
# In AUX 0 line view, restore the default shortcut key for starting a terminal session.
[Sysname] line aux 0
[Sysname-line-aux0] undo activation-key
Alternatively:
[Sysname-line-aux0] activation-key 13
To verify the configuration:
1.
Exit the console session.
[Sysname-line-aux0] return
<Sysname> quit
2.
Log in again through the AUX line.
The following message appears:
Press ENTER to get started.
3.
Press
Enter
.
Pressing
Enter
does not start a session.
4.
Enter
s
.
A terminal session is started.
<Sysname>
Related commands
line
lock
Use
lock
to lock the current user line. This method prevents unauthorized users from using the user line.
