manualshive.com logo in svg

HP EliteOne 705 G1, Maintenance & Service Manual, Page: 116 / 194

Share
Download
HP EliteOne 705 G1 Maintenance & Service Manual Download Page 116

Table 6-5

  Computer Setup—Advanced (for advanced users) (continued)

Update BIOS via Network

Allows you to use F10 Setup to check for BIOS updates from hp.com and apply them using either a

manual selection or an automatically scheduled check on boot-up.

NOTE:

If Windows BitLocker Drive Encryption (BDE) is enabled, HP requires that BDE be suspended

temporarily before the BIOS is flashed. You must get the BDE recovery password and PIN before

suspending BDE. After updating the BIOS, you can resume BDE.

●

Update BIOS via Network (Enabled/Disabled). Enables or disables BIOS network support. Default is

enabled.

●

Update Source (HP/Custom). Selects hp.com or a locally managed custom address to serve BIOS

updates. Default is HP.

Update Address. If 

Custom

 is selected for 

Update Source

, the URL of the locally managed server.

●

Automatic BIOS Update Setting (Disabled, Check and install all updates automatically, Check and

install only important updates automatically, Check for updates but let me decide whether to install

them). Enables or disables the network BIOS update scheduler. Default is disabled.

Automatic Update Frequency (Daily, Weekly, Monthly). Sets the frequency of checks to the BIOS

update server. If a newer version of BIOS is available on the network server, the system will prompt

to update the BIOS. Default is Monthly.

Force Check on Next Reboot (Disabled/Enabled). During the next boot, checks whether an updated

BIOS is available. This value is independent of the 

Automatic Update Frequency

 setting. Default is

disabled.

Ethernet Connection

Provides information about the network connection.

Recovering the Configuration Settings

This method of recovery requires that you first perform the 

Save to Removable Media

 command with the

Computer Setup (F10) Utility before 

Restore

 is needed. (See 

Computer Setup—File on page 95

 in the

Computer Setup—File table.)

NOTE:

It is recommended that you save any modified computer configuration settings to a USB flash media

device and save the device for possible future use.

To restore the configuration, insert the USB flash media device with the saved configuration and perform the

Restore from Removable Media

 command with the Computer Setup (F10) Utility. (See 

Computer Setup—File

on page 95

 in the Computer Setup—File table.)

106 Chapter 6   Computer Setup (F10) Utility

ENWW

Summary of Contents for EliteOne 705 G1



































































































































































































Reviews:

No comments