HP EliteOne 705 G1, Maintenance & Service Manual

Page: 115 / 194

Table 6-5 Computer Setup—Advanced (for advanced users) (continued)
CPM Option Allows you to set:
● Special Display Features (disabled, HCF_dGPU, Surround View, PowerXpress).
● Primary Video Adapter (Int Graphics (IGD), Ext Graphics (PEG), Auto).
● Skip SSD Override (enable/disable).
● Unused GPP Clocks Off (enable/disable).
● Brightness Control Method (VGA Driver, Video BIOS).
● Clock Power Management(CLKREQ#) (enable/disable).
● Thermal Fan Control (auto, disabled)
● GFX LINK CFG: x16, 2 x8-OnboardLanSwitch: (enable/disable).
● MiniPcieSlot (enable/disable).
● WirelessLanRf (enable/disable).
● DDI port detection (enable/disable).
● Adaptive S4 Control (disabled, enabled with EC Method, enabled with RTC Method).
Management Operations Allows you to set:
●
DASH Support (enable/disable). Allows the DASH firmware to be Enabled/Disabled. If enabled, then
DASH Console Redirection, ASF BIOS Mode, and ASF Watchdog Timer become active.
● MCTP Support (enable/disable). Lets you enable Management Component Transport Protocol.
● DASH Console Redirection (enable/disable). If enabled, then DASH Terminal Type becomes active.
● DASH Terminal Type (VT100, VT200+, VT-UTF8, ANSI).
●
ASF BIOS Mode (ON, OFF, Alert Only).
● ASF Watchdog Timer (enable/disable). Allows you to set amount of time for a operating system and
BIOS watchdog alert to be sent if the timers are not deactivated. BIOS watchdog is deactivated by
BIOS and would indicate that a halt occurred during execution if the alert is sent to the management
console. An operating system alert is deactivated by the operating system image and would indicate
that a hang occurred during its initialization. Default is enabled.
Option ROM Launch
Policy
(Windows 8 only). Windows 8 installs as a UEFI operating system (as opposed to ‘legacy’), and ships with
the ‘Legacy Support’ setting off in the BIOS. When ‘Legacy Support’ is off, the Option ROM Launch Policies
are set to ‘UEFI Only’. These policies control whether the Legacy Option ROM or the UEFI driver is loaded
for the following features:
● PXE Option ROMs (UEFI Only/Do Not Launch). Specifies whether the legacy option ROM or the UEFI
driver in the BIOS is used to provide PXE services.
● Storage Option ROMs (UEFI Only/Do Not Launch). Specifies whether the legacy option ROM or the
UEFI driver in the BIOS is used to provide RAID setup and support.
● Video Option ROMs (UEFI Only/Do Not Launch). Specifies whether the legacy VBIOS or the UEFI driver
in the BIOS is used to provide graphics setup and support.
Connected BIOS Enables or disables the feature that updates the BIOS using the network.
●
Connected BIOS (Enabled/Disabled). Enables or disables BIOS network support. Default is enabled.
● Use Proxy (Enabled/Disabled). When enabled, displays Proxy Address field to configure the URL of
the proxy server. Default is disabled.
ENWW Computer Setup (F10) Utilities 105