HP EliteBook Revolve 810 G2 Tablet Page 5 Maintenance And Service Manual Download

Page: 5 / 96

Safety warning notice

WARNING!

To reduce the possibility of heat-related injuries or of overheating the device, do not

place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat

surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface,

such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact

the skin or a soft surface, such as pillows or rugs or clothing, during operation. The device and the AC

adapter comply with the user-accessible surface temperature limits defined by the International

Standard for Safety of Information Technology Equipment (IEC 60950).

Summary of Contents for EliteBook Revolve 810 G2 Tablet

































































































Search results

Summary of Contents for EliteBook Revolve 810 G2 Tablet

Reviews:

Related manuals for EliteBook Revolve 810 G2 Tablet

Brands by name

Popular brands

HP EliteBook Revolve 810 G2 Tablet, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook Revolve 810 G2 Tablet

Reviews:

Related manuals for EliteBook Revolve 810 G2 Tablet

Brands by name

Popular brands