HP EliteBook Revolve 810 G2 Tablet Page 86 Maintenance And Service Manual Download

Page: 86 / 96

9 Windows 7 - Using Computer Setup

(BIOS) and HP PC Hardware
Diagnostics (UEFI)

Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and

output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility

(BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the

amount of system and extended memory.

Starting Setup Utility (BIOS)

▲

To start Setup Utility (BIOS), turn on or restart the computer, quickly press

esc

, and then press

f10

NOTE:

Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the

computer from operating properly.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.

Most BIOS updates on the HP website are packaged in compressed files called

SoftPaqs

Some download packages contain a file named Readme.txt, which contains information regarding

installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed

on the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as

ROM date

and

System BIOS

) can be displayed by pressing

esc

(if you are already in Windows) or by using Setup Utility (BIOS).

Start Setup Utility (BIOS).

Use the arrow keys to select

Main

To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select

Exit

, select

Exit Discarding Changes

, and then press

enter

Select

Yes

Chapter 9 Windows 7 - Using Computer Setup (BIOS) and HP PC Hardware Diagnostics (UEFI)

Summary of Contents for EliteBook Revolve 810 G2 Tablet

































































































Search results

Summary of Contents for EliteBook Revolve 810 G2 Tablet

Reviews:

Related manuals for EliteBook Revolve 810 G2 Tablet

Brands by name

Popular brands

HP EliteBook Revolve 810 G2 Tablet, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook Revolve 810 G2 Tablet

Reviews:

Related manuals for EliteBook Revolve 810 G2 Tablet

Brands by name

Popular brands