Description
Spare part number
128-GB
753728-001
180-GB
753730-001
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 28
).
5.
Remove the service door (see
Service door on page 30
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0×3.0 screw
(1)
that secures the solid-state drive to the computer. (The
solid-state drive tilts up.)
36
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Summary of Contents for EliteBook Revolve 810 G2 Tablet
