manualshive.com logo in svg

HP EliteBook Revolve 810 G2 Tablet, Maintenance And Service Manual, Page: 30 / 96

Share
Download
HP EliteBook Revolve 810 G2 Tablet Maintenance And Service Manual Download Page 30

Spare part number

Description

716747-271

Keyboard with backlight for use in Romania (includes backlight cable and keyboard cable)

716747-281

Keyboard with backlight for use in Thailand (includes backlight cable and keyboard cable)

716747-291

Keyboard with backlight for use in Japan (includes backlight cable and keyboard cable)

716747-A41

Keyboard with backlight for use in Belgium (includes backlight cable and keyboard cable)

716747-AB1

Keyboard with backlight for use in Taiwan (includes backlight cable and keyboard cable)

716747-AD1

Keyboard with backlight for use in South Korea (includes backlight cable and keyboard cable)

716747-B31

Keyboard with backlight for use in the Netherlands (includes backlight cable and keyboard cable)

716747-B71

Keyboard with backlight for use in Sweden and Finland (includes backlight cable and
keyboard cable)

716747-BA1

Keyboard with backlight for use in Slovenia (includes backlight cable and keyboard cable)

716747-BB1

Keyboard with backlight for use in Israel (includes backlight cable and keyboard cable)

716747-BG1

Keyboard with backlight for use in Switzerland (includes backlight cable and keyboard cable)

716747-D61

Keyboard with backlight for use in India (includes backlight cable and keyboard cable)

716747-DB1

Keyboard with backlight for use in Canada (includes backlight cable and keyboard cable)

716747-DD1

Keyboard with backlight for use in Canada (includes backlight cable and keyboard cable)

716747-FL1

Keyboard with backlight for use in the Czech Republic and Slovakia (includes backlight cable and
keyboard cable)

716747-FP1

Keyboard with backlight for use in Northwest Africa (includes backlight cable and keyboard cable)

717379-001

WLAN Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) WiFi + BT 4.0 combo

717380-001

WLAN Intel Dual Band Wireless-N 7260NB 802.11 a/b/g/n (2x2) WiFi 

740011-001

WWAN HP lt4111 LTE/EV-DO/HSPA+ Mobile Broadband Module (for use in the United States
and Canada) 

747833-001

WLAN Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) WiFi + BT 4.0 combo (for use
in Indonesia)

753650-001

WWAN HP hs3110 HSPA+ Mobile Broadband 

753713-001

Service door (includes 4 captive retention screws and 2 rubber feet)

753714-001

Hinge cover (includes hinge cap, WWAN antenna cables and transceivers, and WWAN antenna
cable shield)

753715-001

Top cover (includes display lid switch actuator magnets, orientation lock switch actuator, power
switch actuator, TouchPad, and TouchPad cable)

753716-001

Fan/heat sink assembly (includes replacement thermal material)

753717-001

NFC board (includes cable)

753718-001

Power button board (includes cable)

753719-001

Speaker Kit (includes left and right speakers and cables)

20

Chapter 3   Illustrated parts catalog

Summary of Contents for EliteBook Revolve 810 G2 Tablet

































































































Reviews:

No comments