manualshive.com logo in svg

HP EliteBook Folio 9470m, Maintenance And Service Manual

Share
Download
HP EliteBook Folio 9470m Maintenance And Service Manual Download Page 61

6

Removal and replacement procedures for 
Authorized Service Provider parts

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider. 

Accessing these parts can damage the computer or void the warranty.

NOTE:

HP continually improves and changes product parts. For complete and current information on 

supported parts for your computer, go to 

http://partsurfer.hp.com

, select your country or region, and then 

follow the on-screen instructions.

Component replacement procedures

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

There are as many as 53 screws that must be removed, replaced, or loosened when servicing Authorized 
Service Provider only parts. Make special note of each screw size and location during removal and 
replacement.

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty, 

are on the service tag at the bottom of your computer. See 

Illustrated parts catalog on page 16

 for details.

Component replacement procedures

49

Summary of Contents for EliteBook Folio 9470m









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands