manualshive.com logo in svg

HP EliteBook Folio 9470m, Maintenance And Service Manual

Share
Download
HP EliteBook Folio 9470m Maintenance And Service Manual Download Page 114

Changing the computer boot order

If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is 
the order of devices listed in BIOS where the computer looks for startup information. You can change the 
selection to an optical drive or a USB flash drive.

To change the boot order:

IMPORTANT:

For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before 

beginning these steps.

1.

Insert the HP Recovery media.

2.

Access BIOS:

For computers or tablets with keyboards attached:

▲

Turn on or restart the computer or tablet, quickly press 

esc

, and then press 

f9

 for boot options.

For tablets without keyboards:

▲

Turn on or restart the tablet, and then quickly hold down the volume down button; then select f9.

- or -

Turn on or restart the tablet, and then quickly hold down the Windows button; then select f9.

3.

Select the optical drive or USB flash drive from which you want to boot.

4.

Follow the on-screen instructions.

102 Chapter 13   Backup and recovery in Windows 10

Summary of Contents for EliteBook Folio 9470m









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands