manualshive.com logo in svg

HP EliteBook Folio 9470m, Maintenance And Service Manual

Share
Download
HP EliteBook Folio 9470m Maintenance And Service Manual Download Page 49

RTC battery

Description

Spare part number

RTC battery (includes cable and double-sided tape)

702853-001

Before removing the RTC battery, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 29

).

5.

Remove the hard drive cover (see 

Hard drive cover on page 32

).

Remove the RTC battery:

1.

Disconnect the RTC battery cable (1) from the system board.

2.

Detach the RTC battery (2) from the computer.

3.

Remove the RTC battery.

Reverse this procedure to install the RTC battery.

Component replacement procedures

37

Summary of Contents for EliteBook Folio 9470m









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands