manualshive.com logo in svg

HP EliteBook Folio 9470m, Maintenance And Service Manual

Share
Download
HP EliteBook Folio 9470m Maintenance And Service Manual Download Page 115

Removing the HP Recovery partition (select products only)

HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.

IMPORTANT:

After you remove the HP Recovery partition, you will not be able to perform System Recovery 

or create HP recovery media from the HP Recovery partition. So before you remove the Recovery partition, 
create HP Recovery media; see 

Creating HP Recovery media (select products only) on page 98

.

NOTE:

The Remove Recovery Partition option is only available on products that support this function.

Follow these steps to remove the HP Recovery partition:

1.

Type 

recovery

 in the taskbar search box, and then select HP Recovery Manager.

2.

Select Remove Recovery Partition, and then follow the on-screen instructions.

Restore and recovery 103

Summary of Contents for EliteBook Folio 9470m









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands