HP EliteBook 820 G1 Maintenance And Service Manual Download Page 84

Page: 84 / 146

Remove the card reader board:

Turn the top cover upside down with the front toward you.

Release the ZIF connector

(1)

to which the card reader board cable is attached, and then

disconnect the card reader board cable

(2)

from the system board.

Turn the top cover upside down with the front toward you.

Release the ZIF connector

(1)

to which the TouchPad cable is attached, and then disconnect the

TouchPad cable from the card reader board.

Release the card reader board cable

(2)

through the opening in the top cover.

Remove the three Philllips PM2.0×2.0 broad head screws

(3)

that secure the card reader board to

the top cover.

Chapter 6 Removal and replacement procedures for Customer Self- Repair parts

Summary of Contents for EliteBook 820 G1



















































































































































Search results

Summary of Contents for EliteBook 820 G1

Reviews:

Related manuals for EliteBook 820 G1

Brands by name

Popular brands

HP EliteBook 820 G1, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 820 G1

Reviews:

Related manuals for EliteBook 820 G1

Brands by name

Popular brands