manualshive.com logo in svg

HP EliteBook 820 G1, Maintenance And Service Manual

Share
Download
HP EliteBook 820 G1 Maintenance And Service Manual Download Page 45

4 Removal and replacement

preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

●

Flat-bladed screw driver

●

Magnetic screw driver

●

Phillips P0 screw driver

Service considerations

The following sections include some of the considerations that you must keep in mind during

disassembly and assembly procedures.

NOTE:

As you remove each subassembly from the computer, place the subassembly (and all

accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:

Using excessive force during disassembly and reassembly can damage plastic parts.

Use care when handling the plastic parts. Apply pressure only at the points designated in the

maintenance instructions.

Tools required

37

Summary of Contents for EliteBook 820 G1



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands