HP EliteBook 820 G1 Maintenance And Service Manual Download Page 23

Page: 23 / 146

Right side

Item

Component

Description

(1)

Audio-out (headphone)
jack/Audio-in
(microphone) combo jack

Produces sound when connected to optional powered stereo speakers,
headphones, earbuds, a headset, or television audio. Also connects an optional
headset microphone.

WARNING!

To reduce the risk of personal injury, adjust the volume before

putting on headphones, earbuds, or a headset. For additional safety information,
see the

Regulatory, Safety, and Environmental Notices

NOTE:

When a device is connected to the jack, the computer speakers

are disabled.

NOTE:

Be sure that the device cable has a 4-conductor connector that supports

both audio-out (headphone) and audio-in (microphone).

(2)

DisplayPort

Connects an optional digital display device, such as a highperformance monitor
or projector.

(3)

USB 3.0 ports (2)

Connect optional USB 3.0 devices and provide enhanced USB power
performance.

(4)

Memory card reader

Reads data from and writes data to memory cards such as Secure Digital (SD).

(5)

RJ-45 (network) jack

Connects a network cable.

(6)

Docking port

Connects an optional docking device.

(7)

Power connector

Connects an AC adapter.

Right side

Summary of Contents for EliteBook 820 G1



















































































































































Search results

Summary of Contents for EliteBook 820 G1

Reviews:

Related manuals for EliteBook 820 G1

Brands by name

Popular brands

HP EliteBook 820 G1, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 820 G1

Reviews:

Related manuals for EliteBook 820 G1

Brands by name

Popular brands