HP EliteBook 820 G1 Maintenance And Service Manual Download Page 77

Page: 77 / 146

If it is necessary to replace the display panel:

Remove the six Phillips PM2.0×3.25 screws

(1)

that secure the display panel to the

display enclosure.

CAUTION:

Before turning the display panel upside down, make sure the work surface is

clear of tools, screws, and any other foreign objects. Failure to follow this caution can result

in damage to the display panel.

Lift the top edge of the display panel

(2)

and swing it up and forward until it rests upside

down in front of the display enclosure.

Release the adhesive strip

(1)

that secures the display panel cable connector to the

display panel.

Component replacement procedures

Summary of Contents for EliteBook 820 G1



















































































































































Search results

Summary of Contents for EliteBook 820 G1

Reviews:

Related manuals for EliteBook 820 G1

Brands by name

Popular brands

HP EliteBook 820 G1, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 820 G1

Reviews:

Related manuals for EliteBook 820 G1

Brands by name

Popular brands