TouchPad
Description
Spare part number
TouchPad (includes cable)
730549-001
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
Service cover on page 42
), and then remove the following
components:
a.
Battery (see
Battery on page 44
)
b.
Hard drive (see
Hard drive on page 46
)
c.
Keyboard (see
Keyboard on page 56
)
d.
Top cover (see
Top cover on page 63
)
Remove the TouchPad:
1.
Turn the top cover upside down with the front toward you.
2.
Release the ZIF connector
(1)
to which the TouchPad cable is attached, and then disconnect the
TouchPad cable from the card reader board.
3.
Remove the two Philllips PM2.0×3.25 screws
(2)
that secure the TouchPad to the top cover.
74
Chapter 6 Removal and replacement procedures for Customer Self- Repair parts
Summary of Contents for EliteBook 820 G1
Page 4: ...iv Safety warning notice ...
Page 26: ...Computer major components 18 Chapter 3 Illustrated parts catalog ...
Page 146: ......
