HP E3494A, Installation And Service Manual

Page: 44 / 108

For versions of the PowerPC other than the 603 and 603e, and in future
firmware versions, configuration items may be different. To see a complete
list of configuration items, use the command "help cf". For example:
M>help cf
cf - display or set emulation configuration
cf - display current settings for all config items
cf <item> - display current setting for specified <item>
cf <item>=<value> - set new <value> for specified <item>
cf <item> <item>=<value> <item> - set and display can be combined
help cf <item> - display long help for specified <item>
--- VALID CONFIGURATION <item> NAMES ---
rrt - Restrict to real-time runs
reset - Configure reset actions
speed - Set JTAG clock
mrdop - Configure mem read operation
dmwrop - Configure D mem write operation
imwrop - Configure I mem write operation
mrddel - Set memory read delay
mwrdel - Set memory write delay
breakin - Select BNC break input option
trigout - Select BNC trigger output option
parity - Enable/disable data parity
drtry - Select DRTRY mode
32bitmode - Enable/disable 32 bit mode
M>
To see a more detailed description of any configuration item, use the
command "help cf <item>". For example:
M>help cf rrt
Restrict to real-time runs
cf rrt=yes
cf rrt=no
If yes (and while the processor is running the user program), any
command that requires the processor to be stopped will be rejected.
For example ’reg’ and ’m’.
If no, commands that require the processor to be stopped will
Configuring the HP Processor Probe for PowerPC 603/603e
36