
To update firmware using prgflash.xxx
1
Make a directory on your computer, change to that directory and
copy the files from the floppy to that directory.
On HP-UX Series 700 machines, if your machine is equipped with a floppy
drive, copy the file install.hp7 to this directory with the doscp command and
execute it as follows:
mkdir ppcprobe
cd ppcprobe
doscp <floppy device>:install.hp7 .
./install.hp7 <floppy device>
Where <floppy device> is the name of the floppy raw device file, typically
"/dev/rdsk/0s1".
On SUN Solaris machines, insert the floppy in the drive, run volcheck to
"mount" the volume and copy the files to the current directory.
volcheck
mkdir ppcprobe
cd ppcprobe
cp /floppy/floppy0/* .
eject
On SUN SunOS 4.1 machines, there are no standard utilities for reading
MS-DOS format floppies. To find out if there are any non-standard means of
reading PC format floppies on your machine, check with your system
administrator.
For MS-DOS machines, you can run prgflash.exe copy the files from the
floppy drive to a directory on your hard drive.
md c:\hpprobe
a:
copy *.* c:\hpprobe
For all UNIX machines that do not have floppy drives, you can copy the files
from a LAN based PC using a LAN based file transfer utility like ftp or rcp,
see your network administrator or LAN software documentation. Use binary
mode when transferring the files from MS-DOS machines.
2
Run the
prgflash.xxx
command.
Updating Firmware
To update firmware using prgflash.xxx
71
Summary of Contents for E3494A
