HP e3000, Command Reference Manual

Page: 168 / 334

NEWDIR
Use
Y ou can issue the NEWDIR command from a job, a session, a program, or in
break mo de. Pressing 4
Break
5 has no eect on this command. Y ou m ust ha v e
create directory en tries (CD) p ermission for the paren t directory and sa v e les
(SF) capabilit y . F urthermore, trav erse directory en tries (TD) access is required
for eac h directory comp onen t named in dir name . (Refer to the ALTSEC
command in this c hapter for further information on directory p ermissions.)
Examples
The following t w o examples create a directory called DIR1 . In the rst
example, the directory is created b y sp ecifying the full pathname of the
directory . In the second example, the directory is created b y sp ecifying
the dir name . gr oupname . ac ctname . Note that in the second example, the
dir name is shifted to upp ercase.
d a
c b
NEWDIR /MYACCT/MYGRP/DIR1
d a
c b
NEWDIR dir1.mygroup.myacct
The following example creates an HFS-named directory called john b y
sp ecifying the full pathname of the directory .
d a
c b
NEWDIR /myacct/jones/cmdf/john
The following example creates an MPE-named directory called DIR1 in the
curren t w orking directory (CWD). Note that the dir name is shifted to
upp ercase.
2-156 MPE/iX Commands