HP E-MSM310, Management And Configuration Manual

Page: 180 / 210

Console ports
Console port connector specifications
A-2
Console port connector specifications
The console ports are wired as described in this section.
MSM335 and MSM422 console port
The MSM335 and MSM422 provide a DB-9 (female) console (serial) port connector. The DB-9
connector (DCE) has pin assignments as follows:
To connect to a computer, use a standard (straight-through) serial cable (male-to-female).
MSM410, E-MSMS430, E-MSM460, E-MSM466
console port
These APs provide an RJ-45 console (serial) port connector. Use an RJ-45 to DB-9 adapter
cable (not supplied) with an RJ-45 (male) connector on one end and a DB-9 (female)
connector on the other end. Wire the cable as follows:
Note
The DSR and DTR signals are only supported on the MSM410.
RJ-45 (male) Pins Signal Direction Pins DB-9 (female)
1 CTS to PC 8
2 DSR to PC 6
3 TXD from PC 3
4 GND
5 GND 5
6 RXD to PC 2
7 DTR from PC 4
8 RTS from PC 7
1 2 3 4 5 6 7 8
5 4 3 2 1
9 8 7 6