HP E-MSM310, Management And Configuration Manual

Page: 18 / 210

Introduction
New in this release
1-4
Commands and program listings
Monospaced text identifies commands and program listings as follows:
New in this release
The following new features and enhancements have been added in release 5.5:
Example Description
use-access-list
Command name. Specify it as shown.
ip_address
Items in italics are parameters for which you must supply
a value.
ssl-certificate= URL [%s]
Items enclosed in square brackets are optional. You can
either include them or not. Do not include the brackets.
In this example you can either include the “%s” or omit it.
[ONE | TWO]
Items separated by a vertical line indicate a choice.
Specify only one of the items. Do not include the vertical
line.
New feature or enhancement For information see...
New access points This release supports the following new 802.11n
dual-radio access points: E-MSM430, E-MSM460,
and E-MSM466. For for more information on these
APs, see:
 E-MSM430, E-MSM460, and E-MSM466
802.11n Access Points Quickstart
 Radio configuration on page 3-8
 802.11n MIMO antennas for the E-MSM466
on page C-2
Broadcast filtering
Broadcast filtering on page 4-10
Band steering Band steering on page 4-10
Beamforming Tx beamforming on page 3-28
Transmission protection Tx protection on page 3-29
Identify RADIUS server by host name
Primary/Secondary RADIUS server on page 6-5
LEAP support This release supports LEAP (with WEP, TKIP, or
WPA2 keys) when using an external RADIUS
server to validate user login credentials. Support is
automatic. No configuration is required.