HP E-MSM310, Management And Configuration Manual

Page: 117 / 210

Network configuration
VLAN support
5-5
Link
Speed
 Auto: Lets the AP automatically set port speed based on the type of equipment it is
connected to.
 10: Forces the port to operate at 10 mbps.
 100: Forces the port to operate at 100 mbps.
 1000: Forces the port to operate at 1000 mbps.
Duplex
 Auto: Lets the AP automatically set duplex mode based on the type of equipment it is
connected to
 Full: Forces the port to operate in full duplex mode.
 Half: Forces the port to operate in half duplex mode.
Wireless port configuration
See Radio configuration on page 3-8 .
VLAN support
The AP provides a robust and flexible virtual local area network (VLAN) implementation that
supports a wide variety of scenarios.
For example, VLANs can be used to isolate management from user traffic, or to route traffic
over a local mesh connection.
You can map user traffic to a VLAN for each virtual service community (VSC) or on a per-user
basis by setting the appropriate RADIUS attributes in a user’s account.
Up to 80 VLAN definitions can be created. VLAN ranges are supported enabling a single
definition to span a range of VLAN IDs.
The following AP features can be supported on a VLAN:
 Management tool access
 SNMP access
 SOAP access
Defining a VLAN
To create a new VLAN definition, first you must define a network profile with the required
VLAN ID. Next, you use the profile to assign a VLAN to a port.