HP E-MSM310 Management And Configuration Manual Download Page 116

Page: 116 / 210

Network configuration

Port configuration

5-4

Port configuration

To verify and possibly adjust port configuration, select

Network > Ports > [Port 1

Port 2]

Configuration options for both ports are the same.

VLAN

Allows you to define a default VLAN on the port.

VLAN ID

Defines the default VLAN ID for this port. All outgoing traffic that does not have a VLAN

already assigned to it is sent on this VLAN.

Note

Do not assign this same VLAN ID to users dynamically via RADIUS. If you do, traffic for these

users will be blocked.

Restrict default VLAN to management traffic only

The default VLAN can be restricted to carry management traffic only. Management traffic

includes:



All traffic that is exchanged with the controller (login authentication requests/replies)



All traffic that is exchanged with external RADIUS servers



HTTPS sessions established by managers and operators of the management tool



Incoming and outgoing SNMP traffic



DNS requests and replies.

Default VLAN and untagged port compatibility

When this option is enabled, any traffic being sent on the default VLAN is also sent untagged

on this port.

Summary of Contents for E-MSM310



















































































































































































































Search results

Summary of Contents for E-MSM310

Reviews:

Related manuals for E-MSM310

Brands by name

Popular brands

HP E-MSM310, Management And Configuration Manual

Search results

Summary of Contents for E-MSM310

Reviews:

Related manuals for E-MSM310

Brands by name

Popular brands