Hardware options installation 36
2.
Remove the server from the rack (on page
15
).
3.
Remove the access panel (on page
16
).
4.
Disconnect all internal cables connected to existing expansion boards.
5.
Remove the PCI riser board assembly (on page
16
).
6.
Remove all installed expansion boards.
7.
Remove the PCIe riser board from the assembly.
8.
Install the optional PCI-X riser board.
9.
Install a PCI-X expansion board ("
Expansion board option
" on page
34
).
IMPORTANT:
The server does not power up if the PCI riser board assembly is not seated
properly.
10.
Install the PCI riser board assembly (on page
17
).
11.
Connect all internal cables for expansion boards.
12.
Install the access panel.
13.
Install the server into the rack.
Summary of Contents for DL100 - ProLiant G2 320GB File Print Appliance
