manualshive.com logo in svg

HP DL100 - ProLiant G2 320GB File Print Appliance, User Manual, Page: 51 / 115

Share
Download
HP DL100 - ProLiant G2 320GB File Print Appliance User Manual Download Page 51

 

Software and configuration utilities  51 

To change any ORCA default settings and override the auto-configuration process, press the 

F8

 key when 

prompted. 
By default, the auto-configuration process configures the system for the English language. To change any 
default settings in the auto-configuration process (such as the settings for language, operating system, and 
primary boot controller), execute the BIOS Setup Utility (on page 

50

) by pressing the 

F10

 key during 

power-up when prompted. After the settings are selected, exit the BIOS Setup Utility and allow the server 
to reboot automatically. 

 

BIOS Serial Console 

BIOS Serial Console allows you to configure the serial port to view POST error messages and run BIOS 
Setup Utility remotely through a serial connection to the server COM port. The server that you are 
remotely configuring does not require a keyboard and mouse.  
For more information about BIOS Serial Console, see the 

BIOS Serial Console User Guide

 on the 

Documentation CD or the HP website (

http://www.hp.com/support/smartstart/documentation

). 

 

ROMPaq utility 

The ROMPaq utility enables you to upgrade the system firmware (BIOS). To upgrade the firmware, insert 
a ROMPaq USB Key into an available USB port and boot the system. In addition to ROMPaq, Online 
Flash Components for Windows and Linux operating systems are available for updating the system 
firmware. 
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available 
firmware revisions. 
For more information, see the Download drivers and software page for the server. To access the server-
specific page, enter the following web address into the browser: 
http://www.hp.com/support/

<servername>

 

For example: 
http://www.hp.com/support/dl360g6 

 

LO100i Remote Management 

The server supports LO100i Remote Management functionality. For more information, see the server-
specific information on the HP website (

http://www.hp.com/servers/proliant

). 

 

HP Insight Diagnostics 

The HP Insight Diagnostics utility displays information about the server hardware and tests the system to 
be sure it is operating properly. The utility has online help and can be accessed using the Insight 
Diagnostics CD or at the HP website (

http://www.hp.com/support

). 

 

Summary of Contents for DL100 - ProLiant G2 320GB File Print Appliance




















































































































Reviews:

No comments