Hardware options installation 34
8.
Connect the optical drive and power cable to the optical drive.
9.
Connect the power connector to the power supply backplane.
10.
Install the access panel.
11.
Install the server into the rack.
Expansion board option
To install the component:
1.
Power down the server (on page
15
).
2.
Remove the server from the rack (on page
15
).
3.
Remove the access panel (on page
16
).
4.
Disconnect all internal cables connected to any existing expansion boards.
5.
Remove the PCI riser board assembly (on page
16
).
Summary of Contents for DL100 - ProLiant G2 320GB File Print Appliance
