HP Data Protector A.06.11, Integration Manual

Page: 415 / 500

In the Data Protector GUI, while creating a backup specification, the
Microsoft
Exchange Writer(Exchange Replication Service)
object is not displayed
on the pane for selection of backup objects.
This problem may occur in LCR environments, due to a Microsoft Exchange Server
2007 issue with incorrect display of database copy states in Exchange Management
Console. In such a case, a database copy in a "Failed" state may be displayed as
"Healthy".
Action
To make the Exchange Management Console show the real status of a database
copy and to enable selection of the backup object, restart Microsoft Exchange
Replication Service.
Restore problems
Problem
After the restore of system writers was aborted, the Windows operating system is
corrupted when you restart it
If the restore of some system writers (for example, System Writer) is aborted for any
reason (hardware or software failure, manually aborted, etc.), the Windows operating
system may be corrupted after the restart (for example, the GUI or some system
services cannot be started, etc.).
Action
Depending on the nature of the corruption, repair or re-install the operating system
from the Windows installation CD-ROM.
Problem
Instant recovery of the Microsoft Exchange Server Writer fails
This problem may occur if the Microsoft Exchange Writer is not in the stable state.
Check this by running
VSSadmin list writers
from the command prompt.
Action
Bring the Exchange Server Writer to a stable state by restarting the Microsoft
Exchange Information Store.
Zero downtime backup integration guide 415