HP D6030A - NetServer - E50, Installation Manual

Page: 83 / 106

Appendix A Specifications
77
Factory Default Jumper Settings
This topic provides the factory default settings for jumpers and the location of
connectors on the system board not called out in Figure A-1. The factory jumper
settings should not be altered or it may cause damage to the system board or
components on the board. See Table A-6 and Figure A-2.
CAUTION Do not alter the restricted (factory) settings or damage may
result due to capability issues. HP reserves the right to charge
for resolving problems caused by unauthorized or untrained
non-HP personnel who have made changes to restricted
jumper settings and unsupported features.
Table A-6. Jumper and Connector Restrictions
Item
No.
Supported/
Restricted Description
1 Not Supported CPU Fan Power connector (CPU_FAN)
2 Supported This connector is used for the chassis fan (PWR_FAN)
3 Not Supported Keyboard Power Up Setting jumper (KBPWR)
•
Default = Disabled
4 Restricted I/O Voltage setting jumper (VIO)
•
Factory set = Normal
5 Restricted Voltage Regulator Output Setting jumper (VCORE)
•
Factory set = Normal
6 Not Supported CPU Thermal Sensor connector (JTCPU)
7 Not Supported Wake-On-LAN connector (WOL_CON)
8 Not Supported Chassis Intrusion Alarm connector (Chasis)
9 Not Supported Power Supply Thermal Sensor connector (JTPWR)
10 Not Supported System Management Bus connector (SMB)
11 Supported Panel connector – This header provides the connections
for the power switch and power indicator on the front
panel
12 Supported This connector provides the IDE LED activity light
connection (IDELED) on the front panel
13 Not supported Infrared Port Module connector (IR)