Chapter 8
Configuring the HP NetServer
57
NOTE
You may find it helpful to save the Setup Utility (BIOS)
configuration to a diskette after making the Setup Utility
changes. If the CMOS is corrupted later, you will have a
backup available to reload the Setup Utility configuration.
Refer to the instructions on the HP Startup CD-ROM.
Setup Utility Factory Settings
Table 8-2. Setup Utility Factory Settings
Menu Title
Field Name/
Submenu
Factory Set/
Sub-field
Factory Set
Main
Legacy Diskette A
[1.44M, 3.5]
Default
Halt On
[All Errors]
Default
Advanced
AGP Capability
[2X Mode]
Default
PCI Configuration
VGA BIOS
Sequence
[AGP/PCI]
Boot
Boot order is changed according to the needs of the customer.
Removable Device
[Legacy Floppy]
Default
Other Boot Device
[SCSI Boot Device]
Quick Power On
Self Test
[Disabled]
Memory checking is required
Boot Up
Floppy Seek
[Disabled]
Use the Setup Utility’s defaults except where noted in this table. Some fields
labeled [Auto] affect subsequent fields, which will be N/A or grayed out.
Summary of Contents for D6030A - NetServer - E50
