HP D2D100 User Manual Download Page 88

Page: 88 / 176

The Web Management Interface displays the Login prompt:

The Login is

Administrator

with an initial password of

Admin

Both names are case sensitive. The password can subsequently be changed from the Settings/Admin

menu option, see “

Admin (Settings)

” on page 114.

Only one active session is supported. You cannot connect to an HP D2D if somebody else is logged into

the Web Management Interface. However,

Force Login

is enabled by default and this will disconnect

an active session.
After a period of 20 minutes of user inactivity the session will time out and return to the Login screen.

NOTE:

The web browser used to communicate with the D2D Backup System must have Active Scripting

or JavaScript enabled. If it does not, some of the browser buttons may not be displayed. See

“

Web browser settings

” on page 37.

Summary (Home)

Whenever you log in, the

Summary

page is displayed. It is also accessed from

Home

in the navigation

bar.
Use this page:

•

To display information about your HP D2D Backup System and the backup devices that have

been con

gured for it.

•

To monitor system health and status.

•

To display status information about any physical tape drives that are attached directly to the

D2D Backup System.

The Web Management Interface

Summary of Contents for D2D100

















































































































































































Search results

Summary of Contents for D2D100

Reviews:

Brands by name

Popular brands

HP D2D100, User Manual

Search results

Summary of Contents for D2D100

Reviews:

Brands by name

Popular brands