HP COMPAQ PRESARIO G42 Maintenance And Service Manual Download Page 84

Page: 84 / 143

12.

If it is necessary to replace the webcam module, disconnect the webcam cable

(1)

from the

module. Lift the webcam from the double-sided tape on the display back cover, and remove the
webcam.

13.

If it is necessary to replace the display panel, remove the eight Phillips PM2.5×5.0 screws

(1)

that

secure the display panel to the display enclosure, and then lift the panel from the enclosure

(2)

The display panel is available using the spare part number 592144-001.

14.

If it is necessary to replace the display cable, follow these steps:

Turn the display panel upside down in front of you.

Peel back the tape that secures the cable to the display

(1)

Unplug the cable from the display

(2)

Remove the cable from the display

(3)

Chapter 4 Removal and replacement procedures

Summary of Contents for COMPAQ PRESARIO G42
















































































































































Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands

HP COMPAQ PRESARIO G42, Maintenance And Service Manual

Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands