HP COMPAQ PRESARIO G42 Maintenance And Service Manual Download

Page: 111 / 143

System Configuration menu

NOTE:

Some of the listed System Configuration options may not be supported by your computer.

Select

To do this

Language

Change the Computer Setup language.

Boot options

●

Set an

f10

, and

f12

delay when starting up.

●

Enable/disable CD-ROM boot.

●

Enable/disable floppy boot.

●

Enable/disable internal network adapter boot.

●

Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.

●

Set the Express Boot Popup delay in seconds.

●

Set the boot order.

◦

1st boot device: USB CD-ROM

◦

2nd boot device: USB floppy

◦

3rd boot device: USB SuperDisk

◦

4th boot device: Notebook hard drive

◦

5th boot device: USB hard disk

◦

6th boot device: Network controller

Device Configurations

●

Swap the functions of the

key and left

ctrl

key.

●

Enable/disable USB legacy support. When enabled,
USB legacy support allows the following:

◦

Use of a USB keyboard in Computer Setup even
when a your operating system is not running.

◦

Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.

●

Enable/disable BIOS DMA data transfers.

●

Enable/disable fan always on while connected to an AC
outlet.

●

Enable/disable data execution prevention.

●

Enable/disable LAN power saving mode.

●

Enable/disable SATA Native Mode.

●

Enable/disable Dual Core CPU.

●

Enable/disable HDD translation mode.

Computer Setup in Linux 103

Summary of Contents for COMPAQ PRESARIO G42
















































































































































Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands

HP COMPAQ PRESARIO G42, Maintenance And Service Manual

Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands