HP COMPAQ PRESARIO G42 Maintenance And Service Manual Download

Page: 122 / 143

Using Windows Backup and Restore

To create a backup using Windows Backup and Restore, follow these steps:

NOTE:

Be sure that the computer is connected to AC power before you start the backup process.

NOTE:

The backup process may take over an hour, depending on file size and the speed of the

computer.

Select

Start

All Programs

Maintenance

Backup and Restore

Follow the on-screen instructions to set up and create a backup.

NOTE:

Windows® includes the User Account Control feature to improve the security of your

computer. You may be prompted for your permission or password for tasks such as installing software,
running utilities, or changing Windows settings. Refer to Help and Support for more information.

114 Chapter 7 Backup and recovery

Summary of Contents for COMPAQ PRESARIO G42
















































































































































Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands

HP COMPAQ PRESARIO G42, Maintenance And Service Manual

Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands