HP COMPAQ PRESARIO G42 Maintenance And Service Manual Download Page 67

Page: 67 / 143

Remove the five Phillips PM2.5×6.5 screws

(2)

, the two Phillips PM2.5x4.0 screws

(3)

, and the

four Phillips PM2.5x3.0 screws

(4)

that secure the top cover to the base enclosure.

Turn the computer display-side up with the front toward you.

Open the computer as far as possible.

Release the ZIF connector to which the touchpad

(1)

is connected and disconnect the cable from

the system board.

Release the ZIF connector to which the touchpad button board cable

(2)

is connected and

disconnect the cable from the system board.

Disconnect the speaker cable

(3)

from the system board.

Component replacement procedures

Summary of Contents for COMPAQ PRESARIO G42
















































































































































Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands

HP COMPAQ PRESARIO G42, Maintenance And Service Manual

Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands