HP COMPAQ PRESARIO G42 Maintenance And Service Manual Download Page 22

Page: 22 / 143

Right-side components

Component

Description

(1)

Optical drive

Reads and writes to optical discs.

(2)

Optical drive light

Blinking: The optical drive is being accessed.

(3)

USB port

Connects an optional USB device.

(4)

RJ-11 (modem) jack (select models only)

Connects a modem cable.

(5)

adapter/power/battery

light

●

White: The computer is connected to external power and
the battery is fully charged.

●

Blinking white: The computer is in the Sleep state.

●

Amber: A battery is charging.

(6)

Power connector

Connects an AC adapter.

(7)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a deterrent,

but it may not prevent the computer from being mishandled or
stolen.

Chapter 2 External component identification

Summary of Contents for COMPAQ PRESARIO G42
















































































































































Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands

HP COMPAQ PRESARIO G42, Maintenance And Service Manual

Search results

Summary of Contents for COMPAQ PRESARIO G42

Reviews:

Related manuals for COMPAQ PRESARIO G42

Brands by name

Popular brands