HP Compaq GT7720, Troubleshooting Manual

Page: 31 / 73

Setup Utility—System Information
NOTE: Support for specific Setup options may vary depending on the hardware configuration.
Table 3-2 Setup Utility—System Information
Option Description
Product Name (view only)
Processor Type (view only)
Processor Speed (view only)
Memory size (view only)
System ROM (view only)
Integrated MAC (view only)
UUID (view only)
Chassis Serial # (view only)
Asset Tracking Number (view only)
Asset Tag Enter asset tracking number.
Setup Utility—Standard CMOS Features
Table 3-3 Setup Utility—Standard CMOS Features
Option Description
Date (mm:dd:yy) Allows you to set system date
Time (hh:mm:ss) Allows you to set system time.
IDE Primary Master Indicates ATA Flash settings.
Halt On Allows you to select system response of All Errors, No Errors, or All But Keyboard when POST
Error has been detected. Default is All But Keyboard.
Setup Utility—Advanced BIOS Features
Table 3-4 Setup Utility—Advanced BIOS Features
Option Description
Quick Power-on Self
Test Allows the system to skip certain tests while booting. This will decrease the time needed to boot the
system. Enabled/Disabled. Default is Enabled
1st Boot Device Select Boot Device Priority. Default is USB.
2nd Boot Device Select Boot Device Priority. Default is ATA Flash.
3rd Boot Device Select Boot Device Priority. Default is Network.
Boot Up Numlock
Status Select power on state for Numlock. Default is OFF.
Security Option Select whether the Password is required every time the system boots or only when you enter Setup.
Default is Setup. Option is only available if a password is set.
Using the BIOS Settings 23