HP Compaq GT7720, Troubleshooting Manual

Page: 16 / 73

Installing the Stand
To install the stand:
1. Turn unit upside down.
2. Locate the slots on the bottom of the unit into which the tabs on the stand fit.
3. Insert the tabs into the slots (1) , and then slide the stand about 1.26 cm (1/2 inch) toward the back
of the unit until it locks into place (2) .
Figure 1-8 Installing the stand
Removing the Stand
To remove the stand:
1. Turn unit upside down.
2. Press the tab (1) , and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit and
lift the stand off the unit (2) .
Figure 1-9 Removing the stand
8 Chapter 1 Product Description