HP Compaq GT7720, Troubleshooting Manual

Page: 21 / 73

Replacing the Secure USB Compartment Cover
To replace the secure compartment cover:
1. Place the cover on top of the unit so it is offset about 1.27 cm (1/2 inch) toward the rear of the unit,
allowing the tabs on the cover to align and insert into the slots on the chassis
(1) .
2. Slide the cover toward the front of the unit until it locks in place and the cover is flush with the front
panel of the chassis
(2) .
3. Replace the screw (3) .
Figure 2-2 Replacing the secure compartment cover
Removing and Replacing the Secure USB Compartment Cover 13