Replacing the Metal Side Cover, Expansion Module, and Side Access Panel
This section has three main steps:
●
Replace the metal side cover.
●
Replace the expansion module holding the PCI-Express card.
NOTE:
If your thin client does not have an HP gt7725 Expansion Module, omit this step.
●
Replace the access panel.
To replace the metal side cover:
1.
Place the metal side cover on the chassis, front side first, making sure to align the screw holes in
the cover with the holes in the chassis
(1)
.
2.
Insert and tighten the four screws
(2)
.
Figure 2-6
Replacing the metal side cover
16
Chapter 2 Hardware Changes
Summary of Contents for Compaq GT7720
