HP CL2100 G3 407S, User And Maintenance Manual

Page: 53 / 116

Configuration 53
System event log (POST)
Sensor
Name Sensor
Type Sensor
Number E/R
Type Event
Data1 Event
Data2 Event
Data3 Description
BIOS POST
Sensor
0x0F 0x09 0x6F 0xC0 0x01 0xFF System firmware error. No system
memory is physically installed in
the system.
0x0F 0x6F 0xC0 0x02 0xFF System firmware error. No usable
system memory, all installed
memory has experienced an
unrecoverable failure.
0x0F 0x6F 0xC0 0x0A 0xFF System firmware error. No video
device detected.
0x07 0x6F 0x02 0xFF 0xFF FRBI/BIST failure.
0x10 0x6F 0x04 0xFF 0xFF SEL full.
Entering the pop-up boot menu
To enter the pop-up boot menu, press F7 during system boot when the Press
<F7> to enter Popup Boot
Menu
message displays.
The pop-up boot menu screen displays as shown in the following figure.
Entering PXE boot
To access PXE boot:
1.
Set Network as the first boot device in BIOS setup menu.
2.
Select Network device from the pop-up boot menu.
Entering the BIOS setup menu
The BIOS setup menu is accessible using the following methods:

Connect a USB keyboard, mouse, and VGA monitor directly to the server.

Use a console (or terminal emulator connected to a computer) through the serial port on the rear of
the server.
To access the BIOS setup utility menus: