Diagnostics 167
41.
No external memory detected
42.
DMA buffer %04X is large, size must be less than %04X
43.
File size %d is too big, max is %d
44.
Invalid %s
45.
Failed writing 0x%x to 0x%x
46.
*1
47.
*1
48.
*1
49.
*1
50.
Cannot perform task while chip is not running. (need driver)
51.
Cannot open register define file or content is bad
52.
ASF Reset bit did not self-cleared
53.
ATTN_LOC %d cannot be mapped to %cX CPU event bit %d
54.
%s Register is not cleared to zero after reset
55.
Cannot start Register Timer
56.
poll_ASF bit did not get reset after acknowledged
57.
Timestamp Counter is not counting
58.
%s Timer is not working
59.
Cannot clear bit %s in %cX CPU event register
60.
Invalid "EEPROM_FILENAME" file size, expected %d but only can read %d bytes
61.
Invalid magic value in %s, expected %08x but found %08x
62.
Invalid manufacture revision, expected %c but found %c
63.
Invalid Boot Code revision, expected %d.%d but found %d.%d
64.
Cannot write to EEPROM
65.
Cannot read from EEPROM
66.
Invalid Checksum
67.
Invalid Magic Value
68.
Invalid MAC address, expected %02X-%02X-%02X-%02X-%02X-%02X
69.
Slot error, expected an UUT to be found at location %02X:%02X:00
70.
Adjacent memory has been corrupted while testing block 0x%08x-0x%08x
Got 0x%08x @ address 0x%08x. Expected 0x%08x
*1 Internal Use. Program will not generate this error.
HP NC-Series Broadcom Multifunction adapter
diagnostics
Overview
