Diagnostics 165
o
dflt = 1
•
-rstpl <x> <y>
o
<x> = post GRC rst poll interval, dly in ms; dflt = 10
o
<y> = post GRC rst poll count; dflt = 0 (disable)
•
-rstpld
Above post reset polling counts display enable.
•
-addref (x)
Added a ref card info of dev <x> to refinfo.txt
•
-blink <x>
Blinks the LED on the selected device
•
-rf <x>
Selects a reference device for test D3
•
-sil
Used before the -firm and -firmall options to hide warnings
•
-exe
Executes diags commands without a device present
•
-updateasfcfg
Used with the -firmall option to include updating ASF CFG block
•
-updateumpcfg
Used with the -firmall option to include updating UMP CFG block
•
-pump <file>
Option to program UMP firmware
•
-updatesecfg
Used with the -firmall option to include updating SE CFG block
•
-mfct <file>
Programs a new SSID and SVID based on <file>
•
-fail2
On failure offsets failed message printout
•
-logfl
Log file buffer flush per line
•
-nosz
Do not write the NVRAM with the TPM/NVRAM size
Error codes and messages
1.
Got 0x%08x @ 0x%08x. Expected 0x%08x
2.
Cannot run test while chip is running
3.
Invalid adapter device
4.
Read only bit %s got changed after writing zero at offset 0x%X
