HP BladeSystem bc2000 - Blade PC Page 285 Reference Manual Download

Page: 285 / 434

HP PC Blade Switch CLI Reference Guide

www.hp.com

21-13

SNMP Commands

snmp-server v3-host

The

snmp-server v3-host

Global Configuration mode command specifies the recipient of

Simple Network Management Protocol Version 3 notifications. To remove the specified host, use
the

form of this command.

Syntax

snmp-server v3-host

{

ip-address

hostname

}

username

[

traps

informs

] {

noauth

auth

priv

} [

udp-port

port

] [

filter

filtername

] [timeout

seconds

] [

retries

retries

]

no snmp-server host

{

ip-address

hostname

}

username

[

traps

informs

]

Parameters

ip-address

— Specifies the IP address of the host (targeted recipient).

hostname

— Specifies the name of the host. (Range:1-158 characters)

username

— Specifies the name of the user to use to generate the notification. (Range: 1-25)

traps

— Indicates that SNMP traps are sent to this host.

informs

— Indicates that SNMP informs are sent to this host.

noauth

— Indicates no authentication of a packet.

auth

— Indicates authentication of a packet without encrypting it.

priv

— Indicates authentication of a packet with encryption.

port

— Specifies the UDP port of the host to use. If unspecified, the default UDP port

number is 162. (Range: 1-65535)

filtername

— Specifies a string that defines the filter for this host. If unspecified, nothing is

filtered. (Range: 1-30 characters)

seconds

— Specifies the number of seconds to wait for an acknowledgment before resending

informs. If unspecified, the default timeout period is 15 seconds. (Range: 1-300)

retries

— Specifies the maximum number of times to resend an inform request. If

unspecified, the default maximum number of retries is 3. (Range: 1-255)

Default Setting

This command has no default configuration.

Command Mode

Global Configuration mode

Command Usage

A user and notification view are not automatically created. Use the

snmp-server user

snmp-server

group

and

snmp-server view

Global Configuration mode commands to generate a

user, group and notify group, respectively.

Example

The following command configures an SNMPv3 host.

Console(config)#

snmp-server v3-host

192.168.0.20 john

noauth

Summary of Contents for BladeSystem bc2000 - Blade PC



















































































































































































































































































































































































































































Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews:

Related manuals for BladeSystem bc2000 - Blade PC

Brands by name

Popular brands

HP BladeSystem bc2000 - Blade PC, Reference Manual

Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews:

Related manuals for BladeSystem bc2000 - Blade PC

Brands by name

Popular brands