HP BladeSystem bc2000 - Blade PC Reference Manual Download Page 303

Page: 303 / 434

HP PC Blade Switch CLI Reference Guide

www.hp.com

22-7

Spanning-Tree Commands

spanning-tree disable

The

spanning-tree disable

Interface Configuration mode command disables spanning tree on a

specific port. To enable spanning tree on a port, use the

form of this command.

Syntax

spanning-tree disable

no spanning-tree disable

Parameters

There are no parameters for this command.

Default Setting

Spanning tree is enabled on all ports.

Command Modes

Interface Configuration (Ethernet, port-channel) mode

Command Usage

There are no user guidelines for this command.

Example

The following command disables spanning-tree on Ethernet port e42.

Console(config)#

interface ethernet

e42

Console(config-if)#

spanning-tree disable

Summary of Contents for BladeSystem bc2000 - Blade PC



















































































































































































































































































































































































































































Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews:

HP BladeSystem bc2000 - Blade PC, Reference Manual, Page: 303 / 434

Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews: