HP BladeSystem bc2000 - Blade PC Reference Manual Download Page 293

Page: 293 / 434

HP PC Blade Switch CLI Reference Guide

www.hp.com

21-21

SNMP Commands

show snmp views

The

show snmp views

privileged EXEC mode command displays the configuration of views.

Syntax

show snmp views

[

viewname

]

Parameters

viewname

— Specifies the name of the view. (Range: 1-30)

Default Setting

This command has no default configuration.

Command Mode

Privileged EXEC mode

Command Usage

There are no user guidelines for this command.

Example

The following command displays the configuration of views.

Console#

show snmp views

Name

OID Tree

Type

-----------

-----------------------

---------

user-view

1.3.6.1.2.1.1

Included

user-view

1.3.6.1.2.1.1.7

Excluded

user-view

1.3.6.1.2.1.2.2.1.*.1

Included

Summary of Contents for BladeSystem bc2000 - Blade PC



















































































































































































































































































































































































































































Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews:

HP BladeSystem bc2000 - Blade PC, Reference Manual, Page: 293 / 434

Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews: